Learn to compile, manage and assess a Hazardous Area Verification Dossier against the requirements
Pair workplace protocols and creative initiative to methodically design and produce various projects
Volt Edge has now developed a National Recognised Inspectors course, which is a course designed to allow a Hazardous Area Electrician to:
→ Be authorised at a particular site as an Inspector.
→ Used as technical back up for the QLD Hazardous Areas Auditors application or.
→ Used at technical back up for the Victorian H class inspectors course and application.
The course can be done by Engineers or Electricians with a background in Hazardous Areas to be able to inspect other tradesmen’s hazardous area work to Australian Standards.
This is a 5 day face to face course with a mix of practical and theory. The person, when deemed competent, should be able to inspect previous completed a detailed inspection of a hazardous area installation and then create an auditable document list of non compliances and which clause in the Australian Standards that is required.
Training is completed face to face.
24hr access to Volt Edge support network.
View our calendar to see which dates suits you.
Knowledge of an Australia Standards is important although the student will receive particular information from the below standards.
→ AS/NZS 60079.14:2009 Explosive atmospheres – Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0(2007) MOD).
→ AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules).
Units of Competencies
|Unit Code||Unit Name|
|UEENEEM054A||Plan Electrical installations of hazardous areas – gas.|
|UEENEEM056A||Plan Electrical installations of hazardous areas – pressurisation.|
|UEENEEM057A||Design explosion-protected electrical systems and installations – gas.|
|UEENEEM059A||Design explosion-protected electrical systems and installations – pressurisation.|
|UEENEEM065A||Conduct audit of hazardous areas installations – gas atmospheres.|
|UEENEEM078A||Manage compliance of hazardous areas.|
|Unit Code||Unit Name|
|PMASUP410A||Develop plant documentation.|
|UEENEEG131A||Evaluate performance of low voltage electrical apparatus.|
|UEENEEG060B||Evaluate performance of LV electrical machines.|
|UEENEEE015B||Develop design briefs for electrotechnology projects.|
|UEENEEG130A||Design switchboards rated for high fault levels (greater than 400 A).|
|UEENEEI123A||Design electronic control systems.|
NOTE: This is not an exhaustive list. Email firstname.lastname@example.org or call 1300 761 366 for more information.
After successful completion of this course, you will have the skills to:
→ Verify hazardous classification for the area.
→ Select and check equipment, wiring and accessories.
→ Design system and installation.
→ Audit hazardous areas documentation (verification dossier) and prepare to audit as-built installation.
→ Establish and implement procedures for maintaining explosion-protection.